Toyota Landcruiser 200 series GXL 2016-2021 Reverse Camera Upgrade + Relocation Kit - Centre Mounted

This exclusive kit has been designed and manufactured by us in Australia. It will allow you to easily relocate the reverse camera into the centre position and the door lock / unlock button off to the side. This is a MUST HAVE for backing up directly into a trailer, it will allow you to line up the towball with the trailer hitch everytime! 

Compatible with the following models ONLY:

 

* GXL variants from 2016 - 2021 that have an existing reverse camera and door lock / unlock button. 

NOTE: Does not suit VX / Sahara models with the factory 360 cameras. 

 

The factory camera and door lock / unlock buttons are replaced with new versions (the camera is an upgraded version with higher resolution and wider viewing angle). Grid lines are selectable ON/OFF by cutting a loop wire in the camera harness. 

Unfortunately the factory camera cannot be used as it is too large to easily fit in the new mounting location. 

Available with 2 camera options:

* Standard definition camera (suits factory and aftermarket screens / stereos)

* Full HD 1080p camera (suits most 9.0” / 10.1” or larger Android based replacement units) OUR HD VERSION DOES NOT SUIT THE FACTORY STEREO.

Please note: Android based units must be compatible with a AHD1080p 30fps video format. Our units are compatible, but if you have another brand, please check with the manufacturer / seller before ordering. 

 

No permanent modifications are required, uses the factory wiring (no cutting or soldering).

Kit comes with the following parts:

* New reverse camera with plug and play harness. 

* New door lock / unlock switch.

* 2 x Custom made ABS adapter plates 

* 2 x panel clips 

* 2 x black mounting screws 

* Installation instructions

Approximate fitting time: 30 minutes

Plastic panel removal tool, Torx and flat blade screw drivers are the only tools required. 

12 months warranty on all components.